 |
 |
The
Quality Solution
The essential clarity of Multi-wall Polycarbonate
Sheeting can only be retained if care is taken
to exclude all dust particles insects and moisture.
Contamination by dust and moisture will soon lead
to the growth of unsightly algae and moulds. The
best protection is the use of a quality breather
tape which allows full ventilation of all sections
and channels of the Polycarbonate Sheeting. |
Suits all sizes
& designs of sheeting
Many designs of POLYCARBONATE
SHEETING are now available and more complex sections
are being developed. However, FILTA-FLO will fit and
fully ventilate all sizes and designs of sheets including
those with very small internal sections.
Breathability
The unique composition of FILTA-FLO allows free ventilation
through the entire cross-section of the open ends of
the sheet giving maximum breathability. Only a flow
of air can aid the dispersal of moisture which otherwise
can condense inside the channels and eventually allow
unsightly moulds to flourish.
Water escape
Site problems can sometimes result in water within the
channels. With FILTA-FLO this can easily exit from the
entire cross-section of the sheet end, without the potential
water trap of partial filter designs.
- Partial
filter
- Potential
water trap
- Full
filter
Dust
exclusion
The filter material used is a high quality, non woven,
point welded, tough fabric This allows moisture and
air to pass through, but acts as an effective dust barrier.
Strength
The tape is made from exceptionally strong material
which resists accidental site damage, with the added
advantage of making the sheets safe and easy to handle.
Ultra-violet
resistance
The breather tape is resistant to ultra violet light
and has a life expectancy greater than 20 years when
correctly fitted.
Fungicide
locked in
Unlike cheap tapes the filter component is treated with
a high quality fungicide to ensure continued effective
filtration.
Adhesives
FILTA-FLO uses the very latest adhesive technology,
developed especially for this tape. The adhesive is
integrated with the fabric mesh and is impervious to
water. The tape is quick and easy to apply with the
capacity to initially reposition prior to full adhesion.
The
perfect permanent solution for architects, designers,
fabricators, builders, sheet users.
| Tape
Code Sheet Thickness |
| ADT
10 |
10mm |
| ADT
16 |
16mm |
|
ADT 20 |
20mm |
| ADT
25 |
25mm |
| ADT
30 |
30mm |
| ADT
35 |
35mm |
| ADT
50 |
50mm |
| ADT
60 |
60m |
Blanking Tape is available in all sizes to match vent
tape
^
Back to top
|
